Reading Cycle Count And Resetting Modules To Power-On State - Keysight Technologies 34937A User Manual

General purpose switch modules

Hide thumbs Also See for 34937A:

Table of Contents

SYSTem:MODule:PFAil:JUMPer:AMP5? 4

Example: Querying the system for module identify (all modules) The

following command returns the identify of the module installed in slot 7.

SYSTem:CTYPe? 7

Reading Cycle Count and Resetting Modules to Power-On State

Example: Reading the cycle count for a relay (all switch modules) The

following command returns the relay cycle count on channel 7 and channel 16 for

a module in slot 1.

DIAGnostic:RELay:CYCLes? (@1007,1016)

Example: Clearing the cycle count for a relay (all switch modules) The

following command resets the relay cycle count on channels 7 and 16 for a

module in slot 1.

DIAGnostic:RELay:CYCLes:CLEar (@1007,1016)

Example: Resetting Module(s) to power-on state (all modules) The

following command resets a module in slot 4 to its power-on state.

SYSTem:CPON 4

Keysight 34937A-34939A User's Guide

Table of Contents

34939a 34938a