Chapter 6
Maintenance
This chapter describes how to use the maintenance features of your 54 Mbps Wall-Plugged
Wireless Range Extender WGX102.
Configuring the HomePlug Password
All Wall Plugged devices must use the same HomePlug Network Password. You can assign a
Network Password to the WGX102 on the Wall Plug Settings screen, and optionally apply the
password to other HomePlug devices on your LAN.
From the main menu of the browser interface, under the Setup section, click Wall Plug Settings to
display the configuration menu.
Figure 6-1: Wall Plug Settings screen
Enter the desired HomePlug Network Password in the field provided.
Maintenance
6-1
September 2004 202-10042-01