Dhcp Configuration Of Tcp/Ip In Windows Xp, 2000, Or Nt4; Dhcp Configuration Of Tcp/Ip In Windows Xp - NETGEAR WGX102 Reference Manual

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102

DHCP Configuration of TCP/IP in Windows XP, 2000, or NT4

You will find there are many similarities in the procedures for different Windows systems when
using DHCP to configure TCP/IP.
The following steps will walk you through the configuration process for each of these versions of
Windows.

DHCP Configuration of TCP/IP in Windows XP

Locate your Network Neighborhood icon.
• Select Control Panel from the Windows XP new Start menu.
• Select the Network Connections icon on the Control Panel. This will take you to the next
step.
• Now the Network Connection window
displays.
The Connections List that shows all the
network connections set up on the PC,
located to the right of the window.
• Right-click on the Connection you will
use and choose Status.
Preparing Your Network
September 2004 202-10042-01
C-11