Configuring The Macintosh For Tcp/Ip Networking; Macos 8.6 Or 9.X - NETGEAR WGX102 Reference Manual

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
• The default gateway is 192.168.0.101
4. Type
exit.

Configuring the Macintosh for TCP/IP Networking

Beginning with Macintosh Operating System 7, TCP/IP is already installed on the Macintosh. On
each networked Macintosh, you will need to configure TCP/IP to use DHCP.

MacOS 8.6 or 9.x

From the Apple menu, select Control Panels, then TCP/IP.
1.
The TCP/IP Control Panel opens:
2. From the "Connect via" box, select your Macintosh's Ethernet interface.
3. From the "Configure" box, select Using DHCP Server.
You can leave the DHCP Client ID box empty.
4. Close the TCP/IP Control Panel.
5. Repeat this for each Macintosh on your network.
Preparing Your Network
September 2004 202-10042-01
C-19