About The Control Panel; Names And Functions Of The Control Panel (Fr-Pa02- ) - Mitsubishi Electric FR-E540 K-EC Series Instruction Manual

3.2 About the Control Panel

3.2 About the Control Panel
With the optional control panel (FR-PA02-
frequency, monitor the operation command display, set parameters, and display an
error.
3.2.1 Names and functions of the control panel (FR-PA02-
Hz RUN
A MON
PU EXIT
STOP
RUN
RESET
RUN key STOP/RESET key
Key indication
Key
key
RUN
key
MODE
key
SET
/
key
key
FWD
key
REV
STOP
key
RESET
Unit indications, operating status indications
Indication
Hz Lit to indicate the frequency.
A Lit to indicate the current.
Lit while the inverter is operating. Lit to indicate forward rotation, and flickers to
RUN
indicate reverse rotation.
MON Lit in the monitor display mode.
PU Lit in the PU operation mode.
EXT Lit in the external operation mode.
), you can run the inverter, set the
02
Cover opened
Display
LED 4 digits
Setting key
Mode key
MODE SET
FWD
Forward key STOP/RESET key
Used to give a start rotation command.
You can select the operation mode or setting mode.
You can determine the frequency and parameter setting.
Used to increase or decrease the running frequency
consecutively. Hold down this key to change the frequency.
Press this key in the setting mode to change the parameter
setting consecutively.
Used to give a forward rotation command.
Used to give a reverse rotation command.
Used to stop operation.
Used to reset the inverter when its output is stopped by the
activated protective function.
Description
49
OPERATION
Unit indication
Operation status
Hz RUN
A MON
indication
PU EXIT
Reverse keys
REV
STOP
RESET
Up/down keys
Description
)
02
3