Pre-Operation Information; Precautions For Operation - Mitsubishi Electric FR-E540 K-EC Series Instruction Manual

1.1 Pre-Operation Information

1 OUTLINE
1.1 Pre-Operation Information

1.1.1 Precautions for operation

This manual is written for the FR-E500 series transistorized inverters.
Incorrect handling may cause the inverter to operate incorrectly, causing its life to be
reduced considerably, or at the worst, the inverter to be damaged. Handle the inverter
properly in accordance with the information in each section as well as the precautions
and instructions of this manual to use it correctly.
For handling information on the parameter unit (FR-PU04), stand-alone options, etc.,
refer to the corresponding manuals.
(1) Unpacking and product check
Unpack the inverter and check the capacity plate on the front cover and the rating plate
on the inverter side face to ensure that the product agrees with your order and the
inverter is intact.
1) Inverter type
Capacity plate
Capacity plate
FR-E540-0.4K-EC
Inverter type Serial number
Inverter type
FR - E540 -
Symbol Voltage Class
E540
E520S
2) Accessory
Instruction manual
If you have found any discrepancy, damage, etc., please contact your sales
representative.
Input rating
Output rating
Serial number
Rating plate
0.4
Represents the
Three-phase
inverter capacity
400V class
"kW ".
Single-phase
200V class
1
OUTLINE
Rating plate
MITSUBISHI
INVERTER
MODEL
FR-E540-0.4K-EC
INPUT : XXXXX
OUTPUT : XXXXX
SERIAL :
PASSED
K - EC
Inverter
type