Installation Options - STIEBEL ELTRON DEM 6 Operation And Installation Instructions Manual

2. Installation Instruction

4.2 Installation options

4.2.1 Undersink installation
Non-pressurised, with non-pressurised tap
Pressure-tested, with pressure-tested tap
Appliance installation
Note
• Mount the appliance on the wall.
The wall must have a sufficient load-bearing
capacity.
10
for the qualified installer

• Undo the cover fixing screws by two turns.
• Undo the snap fastener using a screwdriver.
• Remove the appliance cover with the heater
towards the front.
• Using pliers, break out the knock-out for the
power cable in the appliance cover. Correct
the contours with a file if necessary.
• Use the appliance back panel as a drilling
template.
• Secure the appliance back panel to the wall
with suitable rawl plugs and screws.


STIEBEL ELTRON