Opening The Indoor Unit; To Remove The Front Panel; To Re-Install The Front Panel; To Remove The Front Grille - Daikin FTXP20N5V1B Installer's Reference Manual

6 | Unit installation

6.2 Opening the indoor unit

6.2.1 To remove the front panel

6.2.2 To re-install the front panel

6.2.3 To remove the front grille

Installer reference guide
26
1 Hold the front panel by the panel tabs on both sides and open it.
a Panel tabs
a Panel tabs
2 Remove the front panel by sliding it to the left or the right and pulling it
toward you.
Result: The front panel shaft on 1 side will be disconnected.
3 Disconnect the front panel shaft on the other side in the same manner.
a
a Front panel shaft
1 Attach the front panel. Align the shafts with the slots and push them all the
way in.
2 Close the front panel slowly; press at both sides and at the centre.
CAUTION
Wear adequate personal protective equipment (protective gloves, safety glasses,...)
when installing, maintaining or servicing the system.
1 Remove the front panel to remove the air filter.
2 Remove 2 screws (class 20~35) or 3 screws (class 50~71) from the front grille.
3 Push down the 3 upper hooks marked with a symbol with 3 circles.
a
a
FTXP20~35N5V1B + ATXP20~35N5V1B
Split system air conditioners
4P519439-20U – 2022.09