To Fix The Unit On The Mounting Plate - Daikin FTXP20N5V1B Installer's Reference Manual

9.3 To fix the unit on the mounting plate

FTXP20~35N5V1B + ATXP20~35N5V1B
Split system air conditioners
4P519439-20U – 2022.09
2 Pass the drain hose and refrigerant piping through the wall hole and seal the
gap with a putty.
1 Set the indoor unit on the mounting plate hooks. Use the " " marks as a
guide.
2 Press the bottom frame of the unit with both hands to set it on the bottom
hooks of the mounting plate. Make sure that the wires do NOT get squeezed
anywhere.
Note: Take care that the interconnection cable does NOT get caught in the indoor
unit.
3 Press the bottom edge of the indoor unit with both hands until it is firmly
caught by the mounting plate hooks.
4 Secure the indoor unit to the mounting plate using 2 indoor unit fixing screws
M4×12L (accessory).
9 Finishing the indoor unit installation
|
Installer reference guide
45