File Download - NETGEAR ProSafe GS108 User Manual

File Download

File Download enables you to download the firmware and configuration from the TFTP Server or
HTTP Host to restore or update the switch.
.
Note: You can also update the firmware using the in the SmartWizard Discovery utility
(see "Firmware Upgrade" on page
1. Click File Download in the blue navigation panel. A screen similar to that shown below
appears.
.
Figure 5-60
2. Click Firmware Download or Configuration Download to select the type of file for
download.
3. Click TFTP or HTTP to select the download mode.
If the TFTP mode is selected:
a. Enter the IP Address of the TFTP Server.
b. Enter the name of the firmware or configuration source file in the TFTP server.
Managing Firmware and Reset Options
GS108T Smart Switch Software Administration Manual
1-8).
v1.0, May 2007
5-3