NETGEAR ProSafe GS108 User Manual page 48

GS108T Smart Switch Software Administration Manual
Table 3-5. 802.3 Set Details (continued)
Item
Aggregator ID
Maximum Frame
Size
Table 3-6. MED Set Details
Item Description
Capabilities LLDP-MED Capabilities are specific to LLDP-MED Devices, advertisement of this TLV
by Endpoints enables LLDP-MED capable Network Connectivity Devices to definitively
determine support of LLDP-MED by Endpoints they are connecting to.
Device Type A specific type of LLDP-MED Device, which may be either a Network Connectivity
Device or a specific Class of Endpoint Device.
Location Indicates the specific Location ID data format being delivered in the Location ID field.
Format
Location ID Three Location ID data formats are defined.
• Coordinate-based LCI data format
• Civic Address LCI data format
• ECS ELIN data format
Power Type The Power Type field represents, whether LLDP-MED device transmitting the LLDPDU
is a Power Sourcing Entity (PSE) or Power Device (PD).
Power The Power Source field represents the power source being utilized by a PSE or PD
Source device.
Power The Power Priority represents the priority of the PD type device to the power being
Priority supplied by the PSE type device, or the power priority associated with the PSE type
device's port that is sourcing the power via MDI.
Power Value Indicates the total power in watts required by a PD device from a PSE device, or the
total power a PSE device is capable of sourcing over a maximum length cable based on
its current configuration.
Hardware Alphanumerical string that contains the hardware revision of the endpoint.
Revision
Firmware Alphanumerical string that contains the firmware revision of the endpoint.
Revision
Software Alphanumerical string that contains the software revision of the endpoint.
Revision
Serial Alphanumerical string that contains the serial number of the endpoint.
Number
3-24
Description
Port ID information for the aggregated port.
Maximum size of a frame that can be transmitted.
v1.0, May 2007
Managing System Settings