NETGEAR ProSafe GS108 User Manual page 53

.
Figure 3-22
The following information is available for each server log:
• ID: ID of the server log given by the system.
• Server: IP Address of the remote server.
• UDP Port: UDP port number to connect with the server.
• Facility: Type of facility.
• Description: Description of server log.
• Minimum Severity: All levels of severity above this minimum severity will be included
for logging.
2. Add or remove server logs on the Server Logs list.
Adding a server log to the Server Logs list
a. Click Add on the Server Logs screen. A screen similar to that shown below appears.
Managing System Settings
GS108T Smart Switch Software Administration Manual
v1.0, May 2007
3-29