NETGEAR ProSafe GS108 User Manual page 91

.
Figure 4-54
2. The EAP Statistics page contains the following fields:
• Port: Indicates the port, which is polled for statistics.
• Refresh Rate: Indicates the amount of time that passes before the EAP statistics are
refreshed. The possible field values are:
– 15 Sec: Indicates that the EAP statistics are refreshed every 15 seconds.
– 30 Sec: Indicates that the EAP statistics are refreshed every 30 seconds.
– 60 Sec: Indicates that the EAP statistics are refreshed every 60 seconds.
– No Refresh: Indicates that the EAP statistics are not refreshed.
• Frames Receive: Indicates the number of valid EAPOL frames received on the port.
• Frames Transmit: Indicates the number of EAPOL frames transmitted via the port.
• Start Frames Receive: Indicates the number of EAPOL Start frames received on the port.
• Log off Frames Receive: Indicates the number of EAPOL Logoff frames that have been
received on the port.
Configuring the Switch
GS108T Smart Switch Software Administration Manual
v1.0, May 2007
4-37