Password Change; Firmware Upgrade - NETGEAR ProSafe GS108 User Manual

GS108T Smart Switch Software Administration Manual
•

"Firmware Upgrade"

Password Change

You can set a new password of up to 20 ASCII characters.
1. Click Password Change from the Switch Setting section. The Password Change screen
appears. You can set a new password. In this process, you are required to enter the old
password and to confirm the new one.
2. Click Set to enable the new password.
Firmware Upgrade
.
Note: You can also upgrade the firmware using the File Download menu of the switch
(see "File Download" on page
If you click Firmware Upgrade from the main screen (see
selected the switch to upgrade, the following screen appears:
1-8
5-3).
Figure 1-1 on page
Getting Started with Switch Management
v1.0, May 2007
1-3), after you have