GS108T Smart Switch Software Administration Manual
.
Figure 3-14
The following LLDP configuration information is displayed:
•
Advertised Interval: The interval at which LLDP frames are transmitted on behalf of this
LLDP agent.
•
Hold value: A multiplier to Advertised interval. The result would be the TTL value for the
information advertised.
•
Re-init Delay: The minimum delay period before from the time a ports becomes disabled until
re-initialization.
•
Transmit Delay: The delay between successive LLDP frame transmissions initiated by value/
status changes in the local system.
•
Notification Interval: The interval at which notification are generated when remote MSAP
information changes.
•
Fast Start Count: Indicates the number of successive LLDP frame transmissions for one
complete Fast Start interval. The default value 4.
•
Management Address Transmit Ports: Indicates the ports on which the management address
will be transmitted.
3-16
v1.0, May 2007
Managing System Settings