NETGEAR ProSafe GS108 User Manual page 47
Gigabit smart switch
Hide thumbs
Also See for ProSafe GS108:
- User manual ,
- Installation manual (9 pages) ,
- Datasheet (3 pages)
Table of Contents
Advertisement
.
Figure 3-18
The following LLDP remote information is displayed:
•
Local Port: Port on which LLDPDU was received.
•
Chassis ID SubType: Indicates the basis for the Chassis ID entity.
•
Chassis ID: Identifier for the particular chassis in the System.
•
Port ID SubType: The basis for the identifier that is listed in the Port ID field.
•
Port ID: Identifier for the port from which LLDPDU was transmitted.
The following LLDP Remote Device Information is displayed:
•
Port ID SubType: The basis for the identifier that is listed in the Port ID field.
•
Port ID: Identifier for the port from which LLDPDU was transmitted.
•
PVID: Port VLAN ID.
Table 3-5. 802.3 Set Details
Item
Auto Negotiation
Aggregator Status
Managing System Settings
GS108T Smart Switch Software Administration Manual
Description
If auto-negotiation supported and enabled in both the systems, there should be
no speed difference.
Ports through which LLDPDU is transmitted is aggregated or not.
v1.0, May 2007
3-23
Hide quick links:
Advertisement
Table of Contents
