Dimm Installation; Dimm Removal - Supermicro SuperServer SSG-640SP-DE2CR90 User Manual

DIMM Installation

1. Insert the desired number of DIMMs into the slots based on the recommended DIMM
population tables shown above.
2. Push the release tabs on both ends of the DIMM slot outwards to unlock it.
3. Align the key of the DIMM module with the receptive point on the memory slot.
4. Align the notches on both ends of the module with the receptive points on the ends of
the slot.
5. Push both ends of the module straight down into the slot until the module snaps into
place.
6. Press the release tabs to the lock positions to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the DIMM module to unlock it. Once the DIMM module
is loose, remove it from the memory slot.
Warning! To avoid causing any damage to the DIMM module or the DIMM socket, do not use
excessive force when pressing the release tabs on the ends of the DIMM socket. Handle DIMMs
with care. Be aware and follow the ESD instructions given at he beginning of this chapter.
Chapter 3: Maintenance and Component Installation
Key
Push both ends
straight down into
the memory slot.
50
Notches