JL Audio Dominion d110 Owner's Manual page 18

RECEIVER / PROCESSOR
PRE OUT
FRONT L REAR CENTER
FRONT R REAR SUB
WARNING! TURN OFF THE DOMINION®(S) AND ALL OTHER EQUIPMENT IN
THE SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!
EN | Page 18
LP Filter
off | on
DOMINION™ REAR PANEL
SYSTEM CONNECTION DIAGRAM 1:
One Dominion® to Home Theater
Receiver or Home Theater Preamp/
Processor
Most home theater receivers and
preamp/processors provide a single
(mono) subwoofer line-level output.
When connecting a mono subwoofer
output to your Dominion®, you only need
to connect to one of the subwoofer's "Line
Inputs" (Left or Right). Use a good-
quality audio interconnect cable with
RCA-type connectors.
In most cases, you will use
the bass management/crossover
features of the receiver or preamp/
processor. This requires that the "LP
Filter" switch of your Dominion®
is placed in the "Off" position.
WARNING
| Dominion
®