Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rockwell RD5517
Summary of Contents for Rockwell RD5517
- Page 1 RD5517 300W MULTI-FUNCTION TOOL...
- Page 3 RD5517...
- Page 4 RD5517...
-
Page 5: Component List
MULTI-FUNCTION TOOL COMPONENT LIST Variable speed control On/Off switch Sanding pad Semicircle saw blade End cut blade Sanding sheet Hex wrench Flange Bolt Not all the accessories illustrated or described are included in standard delivery. ACCESSORIES GENERAL POWER TOOL SAFETY WARNINGS Hex wrench Sanding Pad... - Page 6 MULTI-FUNCTION TOOL 2) Electrical safety balance at all times. This enables better control a) Power tool plugs must match the outlet. Never of the power tool in unexpected situations. modify the plug in any way. Do not use any f) Dress properly. Do not wear loose clothing or adapter plugs with earthed (grounded) power jewellery.
-
Page 7: Additional Safety Rules
ABN of Positec Australia Pty Ltd is 14 101 682 357 ADDITIONAL SAFETY RULES: TECHNICAL DATA 1) Recommendation that the tool always be supplied via a residual current device with a RD5517 rated residual current of 30 mA or less. Voltage 230-240V～50Hz Power input... - Page 8 MULTI-FUNCTION TOOL Intended Use If one point has become worn, pull off the sanding The power tool is intended for sawing and remodeling sheet, turn it 120° and replace. Note: the pins(a) in the shaft must need to be wooden materials, plastic, plaster, non-ferrous metals and aligned with the hollows (b) of the flange(8).
-
Page 9: Working Hints For Your Tool
MULTI-FUNCTION TOOL and metal (e. g. nails). When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal. WORKING HINTS FOR YOUR TOOL: If your power tool becomes too hot, especially when used at low speed, set the speed to maximum and run it with no load for 2-3 minutes to cool the motor. - Page 12 POSITEC AUSTRALIA PTY LTD ABN 14 101 682 357 MADE IN PRC...