PLUNGE ROUTER cOmPONENT LisT LOcK-ON bUTTON ON/Off swiTch scaLE fOR fiNE aDjUsTmENT Of DEPTh Of cUT fiNE aDjUsTmENT KNOb fOR DEPTh Of cUT cLamPiNG LEvER maRKiNGs fOR zERO RE-sET vaRiabLE sPEED swiTch haNDLE PaRaLLEL GUiDE LOcKiNG scREw basE PLaTE sTEP bUffER cOLLET NUT sPiNDLE LOcK bUTTON DEPTh sTOP fixiNG scREw...
PLUNGE ROUTER accEssORiEs GENERaL safETy RULEs waRNiNG! Read all instructions. Failure to Center pin Template guide follow all instructions listed below may result Parallel guide in electric shock, fire and/or serious injury. The Roller guide term “power tool” in all of the warnings listed below 6.35 mm collet (1/4”) refers to your mains-operated (corded) power tool or 12.7 mm collet (1/2”)(on machine)
Page 9
PLUNGE ROUTER 3. PERsONaL safETy 4) store idle power tools out of the reach of children and do not allow persons unfamiliar 1) stay alert, watch what you are doing and use with the power tool or these instructions common sense when operating a power tool. Do to operate the power tool.
Page 10
PLUNGE ROUTER sPEcific RULEs fOR ROUTER guard when router is plugged in. TabLEs 13. Do not use router bits that have a cutting diameter greater than the clearance hole of table insert. waRNiNG! Read and understand all router 14. Router table is designed for wood cutting only. table and router manual warnings.
PLUNGE ROUTER symbOLs TEchNicaL DaTa To reduce the risk of injury, user must Voltage 220-240V~50/60Hz read instruction manual Power input 1250W No load speed 11,000-30,000/min Max plunge depth 55mm Double insulation Collet size 6.35mm/12.7mm (1/4”&1/2”) Protection class Warning Machine weight 3.3kg OPERaTiNG iNsTRUcTiONs Wear ear protection...
Page 12
PLUNGE ROUTER HOW TO FIT THE 6 mm /1/4˝COLLET (See Fig. C) Lift up router and underlay guide plate in such a This router is supplied with a 6.35mm(1/4”) collet as manner that the router can plunge freely without the an accessory.
Page 13
PLUNGE ROUTER Depress on/off switch (2) then lock on button (1), When milling in the direction with the rotation of the release on/off switch first and lock-on button second. router bit (down cutting), the router can break loose, Your switch is now locked on for continuous use. To preventing control by the user.
PLUNGE ROUTER into the base plate (10) and tighten at the required measure with the wing bolts. • Guide the machine with uniform feed and sideward pressure on the parallel guide (19) along the edge of the workpiece. 12. ROUTiNG ciRcULaR aRc PROfiLEs (see fig. R) •...
Page 16
POSITEC AUSTRALIA PTY LIMITED ABN 14 101 682 357 made in PRC...