Rockwell RD3772 Quick Start Manual
  1. Manuals
  2. Brands
  3. Rockwell Manuals
  4. Power Tool
  5. RD3772
  6. Quick start manual

Rockwell RD3772 Quick Start Manual

800w jig saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RD3772
800W JIG SAW
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RD3772 and is the answer not in the manual?

Questions and answers

Related Manuals for Rockwell RD3772

Summary of Contents for Rockwell RD3772

  • Page 1 RD3772 800W JIG SAW...
  • Page 2 RD3772...
  • Page 3 RD3772...
  • Page 4 RD3772...

  • Page 5: Component List

    800W JIG SAW COMPONENT LIST Switch Lock-On Button On/Off Switch Variable Speed Control Dust cover Steel Wire Parallel Guide Locking Screw Parallel Guide Saw blade * Roller guide Base Plate Pendulum Action Control Hex Key Tool-Free Blade Holder Vacuum Adapter Not all the accessories illustrated or described are included in standard delivery.
  • Page 6 800W JIG SAW b) Do not operate power tools in explosive carrying the tool. Carrying power tools with your atmospheres, such as in the presence of finger on the switch or energising power tools that flammable liquids, gases or dust. Power tools have the switch on invites accidents.

  • Page 7: Jig Saw Safety Warnings

    800W JIG SAW SYMBOL maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges To reduce the risk of injury, user must read instruction manual are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc.
  • Page 8 800W JIG SAW OPERATION INSTRUCTIONS OPERATION NOTE: Before using the tool, read the instruction 1. ON/OFF SWITCH (SEE FIG. F) book carefully. Depress it to start and release to stop your tool. Intended Use 2. SWITCH LOCK-ON BUTTON (SEE FIG.F) The machine is intended for sawing wood, plastic, Depress the on/off switch then the lock on button.

  • Page 9: Working Hints For Your Tool

    800W JIG SAW clean cut and to avoid straining the machine. Generally, For adjustment of the angle of inclination, loose the finer blades use a higher speed and coarser blades use Allen bolt and screw on the base of saw. a slower speed.

  • Page 10: Troubleshooting

    800W JIG SAW your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust.
  • Page 11 POSITEC AUSTRALIA PTY LTD ABN 14 101 682 357 MADE IN PRC...

Table of Contents