Using The Lan Ip Setup Options; Configuring Lan Tcp/Ip Setup Parameters - NETGEAR FVG318 Reference Manual

ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
8. If your dynamic DNS provider allows the use of wildcards in resolving your URL, you may
select the Use wildcards check box to activate this feature.
For example, the wildcard feature will cause *.yourhost.dyndns.org to be aliased to the same
IP address as yourhost.dyndns.org
9. Click Apply to save your configuration.
Note: If your ISP assigns a private WAN IP address such as 192.168.x.x or 10.x.x.x, the
dynamic DNS service will not work because private addresses will not be routed
on the Internet.

Using the LAN IP Setup Options

The LAN IP Setup menu allows configuration of LAN IP services such as DHCP. Select Network
Configuration > LAN Setup to view the screen shown below
Figure 8-1

Configuring LAN TCP/IP Setup Parameters

The firewall is shipped preconfigured to use private IP addresses on the LAN side, and to act as a
DHCP server. The firewall's default LAN IP configuration is:
• LAN IP addresses: 192.168.0.1
• Subnet mask: 255.255.255.0
8-2
v1.0, September 2007
Advanced Configuration