Once installation is complete you will be prompted to restart your computer. Click OK
to continue, but do not connect your modem until instructed.
Step 2 - Connecting your modem
After Windows has restarted, connect your ADSL line to the line socket of the modem.
Connect the USB cable to your computer's USB port and then to the USB socket at the
rear of the modem.
Your computer will detect the modem and start creating a dialup networking account.
This may take a few minutes.
You may be prompted to authorise the addition of unsigned drivers to your system.
Click Continue Anyway.
www.netcomm.com.au
Page 8
Rev.1 - YML626
NB1200 ADSL USB Modem