Windows Me
Step 1 - Loading the drivers and connecting your modem
Have your modem and cables ready, but do not connect them until prompted.
Start Windows and log-in as Administrator if required.
Insert your CD-ROM. The driver software will autolaunch and the installation will
begin.
When the licence screen appears click Yes to continue the installation.
When the Process is going on screen appears, connect the USB cable into your
computer's USB port and then into the USB socket at the rear of the modem.
Windows will detect your modem and launch the new hardware wizard.
Note: You may need to insert your original Windows Me CD-ROM (as supplied
by Microsoft). You may also be required to authorise installation of
unsigned drivers.
www.netcomm.com.au
Page 12
Rev.1 - YML626
NB1200 ADSL USB Modem