Windows 2000; Step 1 - Loading The Drivers; Step 2 - Connecting Your Modem - NetComm NB1200 Quick Start Manual

Windows 2000

Step 1 - Loading the drivers

Have your modem and cables ready, but do not connect them until prompted.
Start Windows and log-in as Administrator.
Insert your NetComm CD-ROM. The driver software will autolaunch and the
installation will begin.
When the licence screen appears click Yes to continue with the installation.
Once installation is complete you will be prompted to restart your computer. Click OK.

Step 2 - Connecting your modem

After Windows has restarted connect your ADSL line to the line socket of the modem.
Connect the USB cable into your computer's USB port and then into the USB socket at
the rear of the modem.
www.netcomm.com.au
Page 10
Rev.1 - YML626
NB1200 ADSL USB Modem