Connecting Via An Ethernet Cable; Connecting Via Wifi - NetComm NF15ACV Quick Start Manual

CONNECTING VIA AN ETHERNET CABLE

If you want to connect your computer to the router via Ethernet cable, follow these instructions.
1.
Connect an Ethernet cable to one of the yellow LAN ports on the back of the NF15ACV router.
DSL
2.
Connect the other end of the Ethernet cable to your computer.
NOTE: There is only one Ethernet cable supplied. If you require more than one Ethernet cable, any
standard Ethernet cable is suitable.

CONNECTING VIA WIFI

1.
Ensure WiFi is enabled on your device (e.g. computer/smartphone/gaming console).
2.
Scan for wireless networks in your area and connect to the network name that matches the
Wireless Network Name found on the Wireless Security Card (included in the box).
3.
When prompted for your wireless security settings, enter the Wireless Security Key listed on your
Wireless Security Card.
VDSL / ADSL Dual Band AC1200 WiFi Gigabit Modem Router with Voice - NF15ACV
WAN 1 2 Eth 3 4 2 Tel
On
12VDC 1.5Amp
1
Off