5.3 Establishing your Wireless Connection
Wireless networking provides an alternative connection to using Ethernet cable. Wireless access is enabled by
default on your NB9WMAXX with the following default settings:
•
Wireless network name (SSID):
•
Security: WEP (64-bit) HEX key:
Note: For advanced wireless settings of your NB9W refer to the User Guide included on your NB9WMAXX CD ROM.
If you have a wireless Ethernet card on your PC, you can connect to your NB9W by following these steps:
1.
Connect the NB9WMAXX as in the diagram on page 9;
2.
Enable the wireless connectivity of your PC;
3.
Search for available wireless networks;
4.
The default name (SSID) of the NB9W's wireless network, 'wireless', will appear;
5.
Connect to the SSID 'wireless' and when prompted, enter the default HEX password which is
A1B2C3D4E5;
6.
Proceed with 'Establishing an ADSL connection via PPPoE' above.
YML891 Rev1
www.netcomm.com.au
'wireless';
'a1b2c3d4e5';
NB9WMAXX Quick Start Guide
NB9WMAXX
1