Heat-N-Glo TIARA I-CE Installer's Manual page 19

Continue adding flue
components, locking
each succeeding
component into place.
Use wall brackets to
support vertical runs
every 2.4 m above the
stove flue outlet.
Figure 13. Adding Flueing Components
3. Install Support Brackets
For Horizontal Runs - The flue system must be
supported every 1.5 m of horizontal run by a
horizontal pipe support.
To install support brackets for horizontal runs:
• Place the pipe supports around the flue pipe.
• Nail the pipe supports to the framing members.
For Vertical Runs - The vent system must be
supported every 2.4 m above the stove flue outlet by
wall brackets.
To install support brackets for vertical runs:
• Attach wall brackets to the flue pipe and secure the
wall bracket to the framing members with nails or
screws.
Figure 14. Installing Support Brackets
Wall
Bracket
2.4 m
23