Grandstream Networks GHP620 User Manual page 11

Firmware Upgrade 2 (FU)
Get Firmware Upgrade Server Address (FA)
Configuration File Download 1 (CU)
Configuration File Download 2 (CU)
Configuration File Download 3 (CU)
Configuration File Download 4 (CU)
Configuration File Download 5 (CU)
Configuration File Download 6 (CU)
View Profile Server Address (CA)
Get TR069 Status (TR)
Reset Network (NR)
Set Profile Download Protocol Type
Set the firmware upgrade protocol type
Get HAC On Status (HAC)
Set HAC on or off (HAC)
Set Room number
Get Room number
Reset Room number
Enable the UCM zero-configuration number
selection process
(Password is required for this operation)
**38*{keypad password}*{server IP address}#
(Password is required for this operation)
**32#
**28*{keypad password}#(Password is required for
this operation)
**28*{keypad password}**{prefix}#
(Password is required for this operation)
**28*{keypad password}**{prefix}*{postfix}#
(Password is required for this operation)
**28*{keypad password}*{server IP address}#
(Password is required for this operation)
**28*{keypad password}*{server IP address}*
{prefix}#
(Password is required for this operation)
**28*{keypad password}*{server IP address}*
{prefix}*{postfix}#
(Password is required for this operation)
**22#
**87#
**67*{keypad password}#
**28x#
**38x#
**422#
**422*x#
**766*{room number}
**766#
**766*{keypad password}+ {room number}#
**82#
Trigger the upgrade of the specified upgrade
firmware path
Broadcast firmware server URL addr
The phone downloads the configuration
The phone downloads the configuration
The phone downloads the configuration
The phone downloads configuration from the
specified server
The phone downloads configuration from the
specified server
The phone downloads configuration from the
specified server
URL address of phone broadcast configuration file
server
Phone broadcast TR069 is available
The phone resets the network configuration
Set and broadcast the current protocol nameThe
values of X can be: 1, 2, 3, 4, 5TFTP [1]; HTTP [2];
HTTPS [3]; FTP [4]; FTPS [5]
Set and broadcast the current protocol nameThe
values of X can be: 1, 2, 3, 4, 5TFTP [1]; HTTP [2];
HTTPS [3]; FTP [4]; FTPS [5]
Broadcast number: 0 (off), 1 (on)
Set HAC on or off: 0 (off), 1 (on)
Set Room number to be added under : Hotel Service
=>Hotel Room Number
Return the room number that has been defined
Reset the hotel room number if number is already in
use , the default keypad password is 123
UCM delivers the configuration and sets the room
number as the preferred account to complete the
selection process.
10/13