Overheating Protection; Delivery Set; Specifications - BRAYER BR4226 Instruction Manual

• Place the HEPA filter (23) and the foam filter (24)
back to their places.
• Install the outlet filter grid (25) back to its place.
Note: before installing the HEPA filter (23) and the foam
filter (24) make sure they are clean and dry.
Vacuum cleaner body
• Clean the vacuum cleaner body with a soft, slightly
damp cloth, and then wipe it dry. Provide that no
liquid gets inside the vacuum cleaner body.
• Do not use solvents or abrasives for cleaning the
vacuum cleaner body and the attachments.
• Do not immerse the vacuum cleaner body, the power
cord and the power plug into water or any other
liquids.

OVERHEATING PROTECTION

• If the electric motor gets too hot during the operation,
the overheating protection system will be set off.
• If during cleaning the vacuum cleaner has switched
off, press the on/off button (17) and unplug the unit.
• Let the vacuum cleaner cool down for 30-40 minutes
and switch it on again. The cool-down time can
differ from the given value, depending on the room
temperature.
• If the vacuum cleaner does not switch on, it may be
caused by another malfunction. In this case apply to
a service center.
STORAGE
• Before a long-period storage of the the vacuum
cleaner clean the vacuum cleaner body, the dustbag
(15), the HEPA filter (23), the foam filter (24) and the
inlet filter (16).
• For easy storing of the vacuum cleaner, use the
brush storage (22).
• Store attachments in the attachment compartment.
• Keep the vacuum cleaner in a dry cool place out of
reach of children and disabled persons.

DELIVERY SET

1. Vacuum cleaner with the dust bin and filters
installed – 1 pc.
2. Flexible hose – 1 pc.
3. Telescopic extension pipe – 1 pc.
4. Universal brush with the floor/carpet switch – 1 pc.
5. Universal pneumatic brush – 1 pc.
6. Crevice nozzle – 1 pc.
7. Furniture/furniture upholstery brush - 1 pc.
8. Disposable paper dustbags – 3 pcs.
9. Instruction manual – 1 pc.

SPECIFICATIONS

• Power supply: 220-240 V ~ 60 Hz
• Rated input power: 2200 W
• Suction power: 450 W
• Dustbag capacity – 4 l
EN 11