Overheating Protection; Delivery Set; Specifications - BRAYER BR4205 Instruction Manual

• Do not immerse the vacuum cleaner body, the power
cord and the power plug into water or any other
liquids.

OVERHEATING PROTECTION

• If the electric motor gets too hot during the operation,
the overheating protection system will be set off.
• If during cleaning the vacuum cleaner has switched
off, press the on/off button (13) and unplug the unit.
• Let the vacuum cleaner cool down for 30-40 minutes
and switch it on again. The cool-down time can
differ from the given value, depending on the room
temperature.
• If the vacuum cleaner does not switch on, it may be
caused by another malfunction. In this case apply to
a service center.
STORAGE
• Before taking the vacuum cleaner away for long-term
storage, clean the vacuum cleaner body, the dust bin
(11), the cyclonic filter (24), the filters (25 and 26),
the dust bin flask (11) of the motor filter and the outlet
HEPA filter .
• For easy storing of the vacuum cleaner, use the
brush storage (15) (pic. 4).
• Keep the vacuum cleaner in a dry cool place out of
reach of children and disabled persons.

DELIVERY SET

1. Vacuum cleaner with the dust bin and filters
installed – 1 pc.
2. Flexible hose – 1 pc.
3. Telescopic extension pipe – 1 pc.
4. Floor/carpet brush – 1 pc.
5. Parquet brush – 1pc.
6. Crevice nozzle – 1 pc.
7. Furniture/furniture upholstery brush – 1 pc.
8. Attachment holder – 1 pc.
9. Instruction manual – 1 pc.

SPECIFICATIONS

• Power supply: 220-240 V ~ 50 Hz
• Rated input power: 2200 W
• Suction power: 420 W
• Dust bin capacity: 4 l
RECYCLING
To prevent possible damage to the
environment or harm to the health of people
by uncontrolled waste disposal, after
expiration of the service life of the unit or the
batteries (if included), do not discard them
with usual household waste, but take the
unit and the batteries to specialized stations for further
recycling.
EN 11