Cleaning The Mp-Aes Instrument; Cleaning The Mp-Aes Easy Fit Torch - Agilent Technologies 4100 User Manual

Cleaning the MP-AES Instrument

Any spills in the sample compartment or on the MP-AES should be
wiped up immediately. The user (or other authorized personnel)
must perform the appropriate decontamination procedure if
hazardous material is spilled on or inside the MP-AES instrument.
The exterior surfaces of the MP-AES instrument should be kept clean.
All cleaning should be done with a soft cloth. If necessary, this cloth
can be dampened with water or a mild detergent. Do not use organic
solvents or abrasive cleaning agents.
Before using any cleaning agent, procedure or decontamination
method except those specified by Agilent, the user (or other
authorized personnel) should check with your local authorized
Agilent field service engineer or representative to confirm that the
proposed method will not damage the equipment.

Cleaning the MP-AES Easy Fit Torch

To help you achieve the maximum usable life from your MP-AES Easy
Fit torch, it is recommended that the following cleaning procedures
are followed as soon as any discoloration appears on the outer tube
of the torch. To maximize torch lifetime and prevent contamination,
you should inspect the condition and cleanliness of the torch on a
daily basis.
The torch is fragile. To prevent damage to the torch, always take care when
CAUTION
handling or storing it.
For detailed torch cleaning instructions, see "Agilent MP-AES Easy
Fit Torch Maintenance" (part number G8000-90019) available online
at www.agilent.com or the MP Expert Help. Click 'Maintenance' and
then select 'Cleaning the torch'.
Store the torch in the original box or a plastic bag when not in use.
Agilent Microwave Plasma Atomic Emission Spectrometers User's Guide
Maintenance, Spare Parts and Troubleshooting
49