Agilent Technologies 4100 User Manual page 27

All connections of services to the MP-AES instrument are made on
the right side of the instrument. Remove the cover by hand to gain
access to the power, USB, accessory, and gas connections. The
onboard argon bottle and regulator (if used) are also accessed via
this side cover.
1
2
3
Figure 2. Input and output connections on the side of the MP-AES instrument
1
2
3
4
5
6
7
Agilent Microwave Plasma Atomic Emission Spectrometers User's Guide
Item Description
Accessory port DA-15 receptacle
For connection of Agilent-specified accessories only
Sampler port DE-9 plug. RS-232 port for connection of the Agilent SPS 3
autosampler
Power switch Combination power switch and main circuit breaker (12 A) for
the MP-AES instrument
Power inlet IEC-C14 mains power inlet receptacle
Accepts IEC-C13 mains lead
USB port USB type B receptacle. Supports USB 2.0 Full Speed
Length of USB cable to PC is to be a maximum of 3 m (10 ft)
Gas inlets Connect required gas supplies
Onboard argon Onboard argon bottle location
bottle receptacle
Installation
4
5
6
7
27