Advertisement
Bullbar Installation Guide
Part Number: BU59-3508, BU59-3658
Fits:
This Bullbar will take approximately 2 hours to install
Tools required are
•
Spanners and socket set.
•
Screwdrivers
•
Pliers and side cutters
Dobinsons BULLBARS should be installed by a qualified installer and it is
the installer responsibility to ensure correct fitment.
Fully read and understand the instructions before beginning the installation
Dobinsons Springs and Suspension
Toyota Landcruiser 100 Series
www.dobinsonsprings.com
Advertisement
Table of Contents
Related Manuals for Dobinsons BU59-3508
Summary of Contents for Dobinsons BU59-3508
- Page 1 • Screwdrivers • Pliers and side cutters Dobinsons BULLBARS should be installed by a qualified installer and it is the installer responsibility to ensure correct fitment. Fully read and understand the instructions before beginning the installation Dobinsons Springs and Suspension...
- Page 2 Dobinsons Springs and Suspension www.dobinsonsprings.com...
- Page 3 Dobinsons Springs and Suspension www.dobinsonsprings.com...
- Page 4 7. If not installing a winch skip to step 15. 16. With help, fit the bulbar onto the mounting 8. See the Installation section of your Dobinsons bracket and loosely fit the mounting hardware 4x4 Winch manual for specific detailed fitting supplied.
- Page 5 For this reason Dobinsons bullbars utilise a Halogen bulb. Halogen bulbs generate a considerable amount of heat to achieve the yellow colour and this causes the air inside the fog light lens to expand and contract.
- Page 7 (Customers with Stainless Loop Deluxe Models Only) The top loops on your Dobinsons Stainless Loop Deluxe steel bullbar are manufactured from high quality 304 grade stainless steel. Once formed and welded it is highly polished to provide a high gloss finish. Whilst the material is a high quality stainless steel, like any other exterior polished surface, care and some maintenance is required to ensure the surface finish quality.
- Page 8 C). After polishing use a soft, clean, dry rag to clean the surface and inspect in the light for an even finish. D). Once complete clean thoroughly again with a sponge and warm water. Dobinsons Spring and Suspension www.dobinsonsprings.com...
Need help?
Do you have a question about the BU59-3508 and is the answer not in the manual?
Questions and answers