Analog Video Connection; Hdmi Out Connection - Raymarine AXIOM 2 PRO Installation Instructions Manual

14.1 Analog video connection

Analog video feeds from sources such as a Thermal camera or Security
camera can be connected to your display by connecting the device to the
BNC connector on the display's power/video/audio cable. The video feed
can be viewed using the Video app.
1. Display's PWR/Video/Audio connector.
2. Power/Video/Audio cable (supplied with your display).
3. Analog video device.
4. Analog video BNC connector.
For installation details, refer to the documentation provided with your analog
video device.

14.2 HDMI Out connection

You can view the display's screen and output audio to an external High
Definition display such as a HDTV or HD monitor by connecting it to the micro
HDMI Out connector located on the rear of the display using the Micro HDMI
(Type D) to HDMI accessory cable (part number A80723). The display screen
can then be viewed by switching the HDTV's or HD monitor's source to the
HDMI connection you connected your display to. You could also connect the
HDMI out connection to a sound system that has a HDMI input connection.
The supported screen resolutions for the HDMI output are:
• 720 x 480p @ 60 Hz
Video connections
• 720 x 576p @ 50 Hz
• 1280 x 720p @ 50 Hz / 60 Hz
• 1920 x 1080p @ 50 Hz / 60 Hz
The standard HDMI connector is connected to the HDTV or HD monitor
and the Micro HDMI connector is connected to the HDMI Out connector on
the rear of the display.
Note:
• The maximum supported cable length is 20 m (65.6 ft).
• Ensure that the locking collar is used to secure the connection to the
display.
1. Display.
2. Display's HDMI Out connector.
3. Micro HDMI (Type D) to HDMI accessory cable (part number A80723)
— Not supplied.
4. HDTV or HD monitor.
69