Parts Ordering Procedure - VendNet ST 3000 Service Manual

Single temp/variable temp glass front vendor
Table of Contents

Advertisement

EVERY 6-MONTHS
CLEAN DOOR AND DELIVERY DOOR SEALS
Clean the door seals. Inspect them for any deformities or cracking.
CLEAN EVAPORATOR COIL
Open the door. Clean the evaporator coil of refrigeration unit
using a soft bristle brush and/or vacuum cleaner.
CLEAN REAR SCREEN
Remove the Back Screen Cover from cabinet back. Clean dust and
debris from screen using a soft bristle brush or a vacuum cleaner.

PARTS ORDERING PROCEDURE

When ordering parts, include the following:
The model and serial numbers of the vendor for which the parts are needed.
1.
Shipping address.
2.
Address where the invoice should be sent.
3.
The number of parts required.
4.
Always refer to the pertinent parts and/or part manual for the correct part number and description of a specific part.
5.
NOTE:
When RIGHT or LEFT is used with the name of a part, it means the person is facing the vendor with the door closed.
Any special shipping instructions.
6.
Carrier desired: air or air special, truck, parcel post or rail.
7.
Signature and date.
8.
Purchase order number, if used.
9.
All orders are carefully packed and inspected prior to shipment. Damage incurred during shipment should be reported at once and a claim
filed with the terminating carrier.
If you do not have the right parts manual: contact VendNet™.
If you have any questions, check out our Website www.vendnetusa.com or call VendNet. Ask for the Parts Department. We will be happy
to assist you. Email: vendnet@vendnetusa.com
S T / V T V E N D O R • 3 5 6 8 3 5 6 7 3 5 6 6 3 5 6 5 •
26
4 2 2 0 5 5 7 R E V A

Advertisement

Table of Contents
loading

Table of Contents