Table of Contents
Advertisement
SERVICE MODE FUNCTIONS
1
TUBE FILL/ DISPENSE COINS
Tube Fill counts coins as
they are deposited and
Shows the dollar amount.
Tube Dispense
Pays out coins from the coin
mech coin tubes.
This mode will also display
the current quantity of
coins in the coin mech
tubes.
Note: For dispensing more than a 4 denomination coin mech use keys greater in the same sequence as shown above.
2
MOTOR COUNT
Displays the total count
of working motors.
3
OPTIONS
(See CONTROL SYSTEM Programming Manual for more information)
4
CONFIGURATION
(See CONTROL SYSTEM Programming Manual for more information)
4.0.0.2 AUTOMATED DELIVERY BOX
1.
2.
3.
4.
5.
S T / V T V E N D O R • 3 5 6 8 3 5 6 7 3 5 6 6 3 5 6 5 •
STEP
1.
Press Service Mode Button
2.
Press
and begin depositing coins
3.
Press
2 times to exit
STEP
1.
Press
to dispense dollar coin
2.
Press
to dispense quarters
3.
Press
to dispense dimes
4.
Press
to dispense nickels
5.
Press
2 times to exit
STEP
1.
Press Service Mode Button
2.
Press
then wait.
3.
Press
to exit.
STEP
Press the 'Service Mode'
button on the control board
Press
Press
Enter Password (default 2314)
Press
TUBE FILL
Motor Count 60
At least 15 of each denomination
(Sales Mode)
TUBE DISPENSE
$1.00/coins
0.25/coins
0.10/coins
0.05/coins
(Sales Mode)
Motors ( - - )
Motors ( - - )
(Sales Mode)
15
DISPLAY
DISPLAY
DISPLAY
DISPLAY
(Motor Count)
Configuration
Password:
Configuration
Advanced Config
Peripherals
* - exit
4 2 2 0 5 5 7 R e v A
Advertisement
Table of Contents
