Table of Contents
Advertisement
6.
Reverse procedure to re-install tray.
7.
Test-vend the tray in its new position to assure that the tray plug is properly seated.
1.
2. Figure 14a. Tray Mounting Nut - Left Front
CANDY, SNACK, AND MEDIUM (3/4) SNACK TRAY ADJUSTMENTS
All of the Snack/Candy/Food/Beverage Trays have adjustable divider locations. By adding, removing, or relocating divider positions a wide
variety of selection compartment widths can be obtained as required. (See Figure 16). The dividers can be located in every ½ Candy
position. This adjustment provides for CANDY (candy bars, crackers), MEDIUM SNACK (small chip bags, cookies), and full sized SNACK
(chips, pastries) width compartments. The divider adjustments also provide for compartments wider than a SNACK compartment width for
larger items. Every tray provides motor connections for the maximum number of selections per tray. Additional parts (dividers, motors,
spirals, and adapter kits) are available ... For additional information refer to the Parts & Service
end of this manual.
S T / V T V E N D O R • 3 5 6 8 3 5 6 7 3 5 6 6 3 5 6 5 •
3.
4. Figure 14b. Tray Mounting Nut - Left Rear
Figure 15. Drawer Slide Removal (Left Shown)
FIG 16.: Divider Positions and Approximate Sizes
10
portion of the website listed at the beginning and
4 2 2 0 5 5 7 R E V A
Advertisement
Table of Contents
