Digigram ALP221e User Manual page 27

User Manual – ALP221e
To perform an update, click on the button
on the screen capture below.
on the right of the "Firmware version" field, as shown
The ALP card is selected from the list of cards detected.
Click on the "Browse" button and select the file matching the new
firmware to be applied (file with extension ".bin").
Click on the "Update" button to launch the update.
The firmware upload is in progress
Once the upload is completed, it is necessary to shut down the
computer. Select "Shut down now" for an immediate automatic
shutdown, or "Shut down later" if you want to shut down the
computer later. In this latter case, don't forget to shut down and
restart the computer before using the card.
Select "Yes" to confirm the shut down, or "No, I will shut down
later". In this latter case, don't forget to shut down and restart
the computer before using the card.
27