Advertisement
The tray may jam if a damaged slide is caught in the
gate. To release the tray:
1. Turn the unit off.
2. Push the select bar down and the slide should
come up.
If the tray is still jammed:
1. While holding the projector post release tab
located at the center of the slide tray, grasp the
tray on the side opposite the index mark and lift.
When the tray is removed, the select bar will
release the slide.
2. Invert the slide tray and rotate the bottom metal
plate until it locks into the zero position. This will
prevent the slides from falling out from the bottom
of the slide tray.
3. Return the tray to an upright position and remove
the lock ring. If the slide is undamaged, return it
to its proper slot. Replace the lock ring and
continue.
11
Advertisement
