Due to transportation, the image position might shift
from the factory setting.
To correct this shift:
1. Remove two plugs as shown in the figure below.
2. Using a Phillips screw driver, rotate screw #1 to
adjust the vertical position and screw #2 to adjust the
horizontal position.
3. Replace the hole plugs.
Adjustment for
Vertical Movement
Screw #1
Adjustment for
Horizontal Movement
Screw #2
Composite Video
Standard video image quality, fine for showing pictures
of objects on a TV monitor.
Y/C (also known as S-video and S-VHS)
Improved resolution that is less grainy due to the
elimination of dot crawl. Better for presentation of text
and graphic slides, since words are more defined.
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
Do Not Remove Lower Plug
9