Related Manuals for Navitar VideoMate 5000
Summary of Contents for Navitar VideoMate 5000
- Page 1 All manuals and user guides at all-guides.com 5000 IDEO Video Slide Projector Instruction Manual The World Leader in Image Quality...
-
Page 2: Table Of Contents
All manuals and user guides at all-guides.com Table of Contents 4. Introduction to the Videomate 6. System Diagrams 8. Safety Precautions 9. Quick Start 10. Installation 12. Slide Tray 14. Projection Lamps 16. Features and Functions 18. Camera Operation 23. Troubleshooting 24. -
Page 3: Introduction To The Videomate
The VideoMate 5000 allows the user to select the video data output: RGB/Sync for inputting images into a video projector or S-Video or composite video for viewing images on a high resolution TV monitor. - Page 4 All manuals and user guides at all-guides.com Introduction to the VideoMate Output to Video Equipment VideoMate Slide-to-Video...
-
Page 5: System Diagrams
All manuals and user guides at all-guides.com System Diagrams Top View Side View... - Page 6 All manuals and user guides at all-guides.com System Diagrams Front View Rear View...
-
Page 7: Safety Precautions
All manuals and user guides at all-guides.com Safety Precautions Safety Precautions To prevent damage to the equipment and operating personnel, please observe the following precautions: Use the correct voltage source as specified on the label. Make sure that the voltage source contains a satisfactory path to ground. -
Page 8: Quick Start
Before starting, review the precautions on page 6. To “Quick Start” the VideoMate 5000, proceed as follows: 1. Unwind the cord under the base of the unit and plug it into a suitable power supply. -
Page 9: Installation
Y/C (S-video). RGB/Sync can be accessed by 4 BNC connectors located under the handle. The VideoMate 5000 outputs true red, green and blue information as well as one standard video output. At the factory, the unit was set up for RGB/Sync and Y/C outputs. - Page 10 All manuals and user guides at all-guides.com Installation NOTE: Opening the iris will decrease depth of field. This means that the darker slides, you will open the iris more and will be able to judge focus more critically; but, it also means that any deformities in the slide will cause a visible “out-of-focus”...
-
Page 11: Slide Tray
All manuals and user guides at all-guides.com Slide Tray Setting Up the Slide Tray This system is designed to permit the use of already prepared presentations without requiring the reorientation of slides. For those setting up a new tray and/or presentation: 1. - Page 12 All manuals and user guides at all-guides.com Slide Tray Removing the Slide Tray To remove the tray from the projector without loosening the slides: 1. Hold the selector bar down and rotate the tray back to the zero index position. 2.
-
Page 13: Projection Lamps
Replacing the module takes considerably less time than changing the lamp. Spare lamp modules can be purchased. Please call for price and availability (Navitar part #2-10299) - Page 14 All manuals and user guides at all-guides.com Projection Lamps To change the lamp: 1. If the unit has been running, switch the power to FAN and wait 5 to 10 minutes for it to cool down. 2. Turn the power switch to OFF. 3.
-
Page 15: Features And Functions
All manuals and user guides at all-guides.com Features and Functions 8-Pin Receptacle The 8-pin receptacle provides access to the circuitry of the projector and allows for additional external control and programming capability. Functions include forward and reverse slide change, sensing of the zero tray position when the shutter is closed and electrical grounding. - Page 16 All manuals and user guides at all-guides.com Features and Functions 7 and 8 (Low Voltage Supply) For operating external equipment. The current is supplied by a secondary winding on the main motor, isolated from the line-voltage power, and is available whenever the main projector motor is running.
-
Page 17: Camera Operation
All manuals and user guides at all-guides.com Camera Operation Camera Controls The VideoMate 5000 has push-button on-screen menu controls. White Balance Adjustment Correctly setting the white balance, results in a picture with natural tones. This camera allows the white balance to be set both automatically and manually. - Page 18 All manuals and user guides at all-guides.com Camera Operation Automatic Adjustment Messages The following messages appear after the white balance is adjusted automatically: e t i y l l u l l o i t . t c e t i y l l u l l o i t...
- Page 19 All manuals and user guides at all-guides.com Camera Operation Factory Settings Press the Menu button to view the camera settings. > K ° Altering the Factory Settings The values can be set or changed using the menu dis- played on the TV monitor screen. In the following example of basic operation, we will alter the gain setting.
- Page 20 All manuals and user guides at all-guides.com Camera Options Page Scrolling The menu is spread out over two pages. Use the following procedure to display the second page. 1. Move the cursor to PAGE with the FUNCTION UP button. 2. Press the DATA UP or DATA DOWN button. The second page of the menu appears on the TV monitor screen.
- Page 21 OFF: The G signals are output without sync signals. D-SUB: The VideoMate 5000 is a 3 CCD unit and always outputs RGB/Sync output. In addition, either Y/C or composite video can be output, but not both simultaneously.
-
Page 22: Troubleshooting
All manuals and user guides at all-guides.com Troubleshooting p " " ? c i r e l t c t i " g i l o i t " . t t u o i t . t i t i a y r t . -
Page 23: Specifications
All manuals and user guides at all-guides.com Specifications i f i o i t " 3 i l r r o l t l i f e i l r o l o i t ) l a l a t o i t n i l o i t... -
Page 24: Warranty
For service, repair or return procedures under this warranty, contact your distributor, your local Navitar field officer or Navitar direct at (716) 359-4000 or (800) 828- 6778 in the United States. Except as stated herein, Navitar makes no other warran- ties, expressed or implied by law, whether of merchant- ability, fitness for a particular purpose or otherwise. - Page 25 All manuals and user guides at all-guides.com Notes...
- Page 26 All manuals and user guides at all-guides.com Ektagraphic and Kodak are both trademarks of the Eastman Kodak Company. VideoMate and Navitar are both trademarks of Navitar, Inc.
- Page 27 All manuals and user guides at all-guides.com Navitar, Inc. 200 Commerce Drive Rochester, NY 14623 USA Phone (716) 359-4000 Fax (716) 359-4999 Internet: http://navitar.com/ Email: info@navitar.com...