Larius OMEGA 5:1 Manual page 39

• (IF PROVIDED) TIGHTEN AND CHECK ALL THE FITTINGS FOR
CONNECTION BETwEEN PUMP, FLEXIBLE HOSE AND SPRAY
GUN BEFORE USING THE EQUIPMENT.
• ALWAYS USE THE FLExIBLE HOSE SUPPLIED WITH STANDARD
KIT.
THE USE OF ANY ACCESSORIES OR TOOLING OTHER THAN
THOSE RECOMMENDED IN THIS MANUAL, MAY CAUSE
DAMAGE OR INJURE THE OPERATOR.
• THE FLUID CONTAINED IN THE FLExIBLE HOSE CAN BE VERY
DANGEROUS. HANDLE THE FLEXIBLE HOSE CAREFULLY. DO
NOT PULL THE FLEXIBLE HOSE TO MOVE THE EQUIPMENT.
NEVER USE A DAMAGED OR A REPAIRED FLEXIBLE HOSE.
The high speed of travel of the product in the hose
can create static electricity through discharges and
sparks. It is suggested to earth the equipment. The
pump is earthed through the earth cable of the supply.
(IF PROVIDED) The gun is earthed through the high
pressure flexible hose.
All the conductors near the work area must be
earthed.
• NEVER SPRAY OVER FLAMMABLE PRODUCTS OR SOLVENTS
IN CLOSED PLACES.
• NEVER USE THE TOOLING IN PRESENCE OF POTENTIALLY
EXPLOSIVE GAS.
If the product to be used is toxic, avoid inhalation
and contact by using protection gloves, goggles
and proper face shields.
Take proper safety measures for the protection of
hearing in case of work near the plant.
ED. 01 - 09/2022 - Cod. 150206
Never spray over flammable products or solvents
in closed places.
Never use the tooling in presence of potentially
explosive gas.
Always check that the product is compatible with the
materials composing the equipment (pump, spray
gun, flexible hose and accessories) with which it
can come into contact. Never use paints or solvents
containing Halogen Hydrocarbons (as the Methylene
Chloride). If these products come into contact with
aluminium parts can provoke dangerous chemical
reactions with risk of corrosion and explosion.
Avoid approaching too much to the pump piston
rod when the pump is working or under pressure.
A sudden movement of the piston rod can cause
wounds or finger squashing.
• MAKE SURE YOU KNOw HOw TO STOP THE EQUIPMENT IN CASE
OF NEED. wE ALSO RECOMMEND THAT INEXPERIENCED USERS
BE INSTRUCTED ON CORRECT AND SAFE USE BEFORE USE.
• KEEP PERSONNEL NOT RESPONSIBLE FOR THE EQUIPMENT
AwAY, ESPECIALLY IF THE PRODUCT TO BE USED IS TOXIC
• IF NECESSARY, USE wARNING SIGNS TO KEEP PRESENT
PEOPLE AT A SAFE DISTANCE.
• MAKE SURE THAT THERE IS SOMEONE NEARBY ABLE TO
FEEL YOU IN THE EVENT OF AN ACCIDENT.
The machine is equipped with an anti-freeze system
that allows it to work even at very low temperatures.
However, after a few minutes of operation, the
upper metal outer surface cools dramatically. Avoid
touching the area indicated.
Contact of the skin with the low-temperature area
may cause frostbite. Common working clothes and
leather gloves provide adequate protection.
OMEGA 5:1 IT EN
www.larius.com
39