Extreme Networks 8820 Hardware Installation Manual page 39

Install Your Switch
Figure 20: Two-Post Mid-Mount: Complete
7. For Extreme 8820-40C, install the ground lug cables to the rack using an M6 screw and the four
screws provided (grounding screws for 2-post installation shipped with the device in a separate
bag).
Figure 21: Extreme 8820-40C grounding location
8. Verify that the device is level and is firmly attached to the rack.
If your device comes with installed AC power supplies, skip to the topic:
46.
If your device does not have an installed power supply, install one or two power supplies using the
instructions in Install Internal Power Supplies
Attach the Device to a Two-Post Rack
on page 40.
Extreme 8820 Hardware Installation Guide
Turn on the Device on page
39