Self-Diagnosis; Self Diagnosis, Safety Measures, Cleanliness Regulations And Directions; Additional Instructions When Undertaking Assembly Work On The Air-Conditioning System - Skoda Octavia II 2004 Workshop Manual

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
01 –

Self-diagnosis

1 Self diagnosis, safety measures,
cleanliness regulations and direc‐
tions
1.1 Self-diagnosis
This Rep.-Gr. is deleted.
For this use the "Vehicle self-diagnosis", "Measuring method" and
"Fault finding" ⇒ Vehicle diagnostic tester.
1.2 Additional instructions when undertak‐
ing assembly work on the air-condition‐
ing system
WARNING
Do not open the refrigerant circuit of the air conditioning sys‐
tem.
Note
To avoid causing damage to the condenser and to the refrigerant
lines and hoses make sure the lines and hoses are not over-ex‐
tended, kinked or bent.
Steps which should be taken in order to remove and install the
engine without opening the refrigerant circuit:
– Unscrew the retaining clip(s) on the refrigerant lines.
– Remove V-ribbed belt
– Remove AC compressor from the bracket for auxiliary units
⇒ page 23 .
– Mount the air conditioning compressor and the condenser in
such a way that the refrigerant lines/hoses are not under ten‐
sion.
2
Rep. gr.01 - Self-diagnosis
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
⇒ page 23 .