Skoda Octavia II 2004 Workshop Manual page 17

– First, unscrew the screw -1-.
– Then unscrew screws -2- and -3- and remove the pendulum
support.
Vehicles with four-wheel drive
– Remove assembly carrier without steering gear ⇒ Chassis ⇒
Rep. gr. 40 .
– Remove propshaft from gearbox ⇒ Gearbox ⇒ Rep. gr. 39 .
Continued for all vehicles
Caution
The decoupling element in the pre-exhaust pipe should not be
bent by more than 10° - risk of damage.
– Remove the pre-exhaust pipe from the exhaust turbocharger
⇒ page 229 .
– Unlatch the fuse and disconnect the front plug from the engine
control unit ⇒ page 227
– Release duct for engine wiring harness -arrow- and pull out
upwards.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
.
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1. Removing and installing engine
11