Fan Motor - Hisense BCD-543WP2BF1Z6/HC1(H) Service Manual

38
6.3. Removing the connector of compressor
●
1.Unplug the appliance.
2.Use a screwdriver to remove the protector box as picture 1.
3.The terminals connected the compressor as picture 2.
●

6.4 Fan motor

6.4.1 Basic parameters
Rated voltage:
F.FAN: DC12V
C.FAN: DC12V
6.4.2 Checking method
1. Check the connecting wiring of fan motor is well or not, repair if it is broken.
The freezer fan motor corresponding pin No. 13~14 on CN4 connector of main-board, as
the drawing below.
The condenser motor corresponding pin No. 1~2 on CN4 connector of main-board, as
the drawing below.
2. Pin No. 14 connect 12V power and pin No. 13 connect GND, if the freezer fan motor
works normally, change the main-board; If not , change the freezer fan motor.
Pin No. 2 connect 12V power and pin No. 1 connect GND, if the condenser fan motor
works normally, change the main-board; If not , change the condenser fan motor.
Hisense Refrigerator