Using The Appliance - Hisense BCD-543WP2BF1Z6/HC1(H) Service Manual

Table of Contents

Advertisement

10

4.2 Using the appliance

This section tells you how to use most of the useful features. We recommend that you read
through them carefully before using the appliance.
Getting cold water
The water dispenser is located in the left side of fridge room. Open the refrigerator doors,
and push the water dispenser button to get water,. Then move your glass down the
dispenser lever in the suggested position and press it.
Hold the glass underneath the dispenser for 2~3 seconds after releasing the dispenser
button. Water may continue to dispense after the button is released.
Water clouding phenomenon
All water provided to the refrigerator flows through the filter which is an alkaline water filter.
In the filtering process, the pressure of the water that has flowed out of the filter is increased,
and the water becomes saturated with oxygen and nitrogen. When this water flows out into
the air, the pressure plummets and the oxygen and nitrogen get supersaturated, which
results in gas bubbles. The water may temporarily look misty or cloudy due to these oxygen
bubbles. After a few seconds, the water will look clear.
.
1. Changing the water filter
To drink the freshest and cleanest water from your refrigerator, change the filter on time.
To change the water filter, follow these steps:
1. Shut off the water supply. Then turn out the water filter (A) about 1/4 turn, counter-
clockwise.

Advertisement

Table of Contents
loading

Table of Contents