Assembly Of Function Modules For Io-Link, Star-Delta Starting - Siemens SIRIUS 3RA2711 Equipment Manual

5.4

Assembly of function modules for IO-Link, star-delta starting

The figure below shows the assembly for star-delta starting.
①
②
③
Figure 5-15
Note
No auxiliary wiring necessary!
If you use the pre-wired star-delta combination, you must dismantle the wiring modules for
connecting the control conducting paths.
Reference
You can find information about the contactors in the operating instructions for the contactors
and contactor combinations used. Appendix "References (Page 122)" has a list of the relevant
operating instructions.
SIRIUS 3RA2711 function modules for IO-Link
Equipment Manual, 08/2022, A8E96801709001A/RS-AD/006
5.4 Assembly of function modules for IO-Link, star-delta starting
Basic module for IO-Link, star-delta starting
Coupling module, star-delta starting
Coupling module, star-delta starting
Contactor for communication connection (line contactor Q11)
Standard contactor (delta contactor Q13)
Standard contactor (star contactor Q12)
Assembly of function modules for IO-Link, star-delta starting
Application planning
47