Simocode Dp Behind The Ie/Pb Link Pn Io; Gsd: Simocode Dp Basic Type Selection; Pdm: Simocode Dp Basic Type Selection - Siemens SIMOCODE DP Programming And Operating Manual

1.8.3

SIMOCODE DP behind the IE/PB Link PN IO

1.8.3.1

GSD: SIMOCODE DP basic type selection

• Open STEP 7 HW Config. From the Hardware Catalog, Profile standard, navigate to PROFIBUS
DP -> Additional Field Devices → Switching Devices → SIMOCODE-DP. Place this device on the
PROFIBUS network.
1.8.3.2

PDM: SIMOCODE DP basic type selection

• Open STEP 7 HW Config. From the Hardware Catalog, Profile standard, navigate to PROFIBUS
DP -> Switching Devices → Simocode DP (PDM). Place this device on the PROFIBUS network.
SIMOCODE DP PCS 7 Library Migration (Legacy) - V9.1 SP2
Programming and Operating Manual, 11/2022, A5E51265657002A/RS-AC/003
Introduction
1.8 Example configurations
23